Engineering

Research Papers/Topics Engineering

An Improved Gaussian Filter Technique for Biomedical Image Processing: An Early Lung Cancer Detection Technique

ABSTRACT For accurate and high rate of lung cancer detection using image processing, an effective preprocessing technique is required. A quality preprocessing technique is necessary to ensure effective removal of noise that interferes with the features of the image and hence improves lung cancer detection rate and accuracy. In this research, an Improved Gaussian Filter (IGF) technique was developed for effective lung image preprocessing. For image segmentation, Otsu thresholding method was us...

Effect of Delay Period on Performance of Compression Engine Running on Jatropha Fuel

Abstract Jatropha Biodiesel was tested in a single cylinder direct-injection, water cooled diesel engine to investigate the operational parameters of a small capacity diesel engine under five engine loads, constant speed test. The jatropha oil is used as a non edible oil to produce the biodiesel. The investigated blends were B0, B25, B50, B75 and B100, where (B#) denotes bio-diesel fuel volume percentage in diesel oil. The jatropha biodiesel was prepared locally in Sudan, specifications of wh...

Potentials of Processed Termite as a Stabilizing Agent

ABSTRACT Clay soil posses a great threat causes problem on civil engineering structures due to its tendency to swell when it is in contact with water and shrinks when they dry out. Stabilization using chemical admixtures is the oldest and popular method of soil improvement. In this study, an investigation was conducted to explore the possibility of using processed termite mound as a stabilizing admixture to improve clay soils. This investigation involves the determination of the swelling pote...

A Hybrid Technique for Speckle Noise Reduction in ultrasound images

Abstract In the field of biomedical imaging, Ultrasound is an incontestable vital tool for diagnosis, it provides in non-invasive manner the internal structure of the body to detect eventually diseases or abnormalities tissues. These images are obtained with a simple linear or sector scan US probe, which show a granular appearance called speckle. . Unfortunately, the presence of speckle noise affects edges and fine details which limit the contrast resolution and make diagnostic more difficult...

Power System Compensation Using Passive Compensators and Facts Controllers

ABSTRACT The study used passive compensators and FACTS controllers to achieve power system compensation by obtaining load flow of the Northern Nigerian 330kV transmission grid; determining the voltage magnitudes at the various buses; identifying the voltage violations and applying the passive compensators and FACTS controllers at the worst case scenarios of the voltage violations. The work compared the effects of the compensators on the Northern Nigerian 330kV transmission grid. The load flow...

Forecasting Active and Reactive Power at a Substation Transformer in Distribution Network

ABSTRACT This work addressed the problem of forecasting active and reactive power at a substation transformer in a distribution system. Accurate power forecast is of great importance in power distribution planning, reactive power support control and intelligent power management. Due to the complexity of the power system, an intelligent and adaptive forecast algorithm based on the Adaptive Neuro-fuzzy Inference System (ANFIS) was modeled for the power forecast. For the proposed ANFIS forecast ...

The Influence of Rotor Cage Winding on the Performance of a Transfer Field Machine

ABSTRACT This work presents the influence of rotor Caged winding on the performance of a Transfer Field (TF) machine. The transfer field (TF) machine comprises two identical machines that are integrally wound and mechanically coupled together but with their pole axes 90 electrical degrees out of phase. This project investigates the influence of rotor caged winding on the performance of a transfer field machine using the analysis of the caged and cage-less rotor winding configurations. From th...

Resource Reservation Scheme with Retrial for Improved Gsm Network Performance

ABSTRACT The need to increase the number of channels in a limited radio spectrum while covering a large area in a mobile cellular network has lead to the use of various cell design techniques. With an increased number of channels, handover calls can be dropped while moving from one cell to another in the search of a better signal or as a result of user mobility. New calls are also blocked when the traffic channels are fully occupied. However, new calls should be treated fairly and not to be e...

A Current Source Inverter-Fed Constant Air Gap Flux Controlled Squirrel Cage Induction Motor Drive.

ABSTRACT In this thesis, a current source inverter fed squirrel cage induction motor drive at constant air gap flux is presented. The drive scheme is conceived to take advantage of the short circuit withstand capability of the current source inverter and the ruggedness (even under harsh conditions) of the squirrel cage induction motor. The variable inverter input dc link current is derivable from either a controlled ac to dc converter or a controlled dc to dc converter. The constant motor air...

ICT Assistive Technology for the Blind and Visually Impaired Persons

ABSTRACT This study sought to understand the role of the Internet in information provision, within the context of other sources of information and everyday information needs. The study also presents findings about the current ways in which people who are blind and visually impaired find information for their everyday lives; the role of the Internet in this process; barriers to using computers and the assistive technologies. A system was designed and created using Visual Basic studio15 to sho...

Design and Construction of a Machine for the Production of Pulverized Coal-Rice Husk Briquettes

ABSTRACT The first part was the design and construction of a machine model using wood and the second part w pulverized coal-rice husk briquettes. The dt find the different loads due to shear stress on varlous parts or the nlachlne as the materials flow during consolidation. The loads obtained were used to dimension gears, shafts and pulleys that form the power transmission system of the machine. The machine was then drawn to produce a detail dimensional model in software form using AutoCAD. A...

A Novel Approach for Power System Protection in High Voltage Power System at 132kv

ABSTRACT In this thesis, a novel approach for the protection of transmission lines which utilizes only coefficient energy for both detection and classification is proposed. The fault current signals generated by workspace on MATLAB simulation model have been analyzed using Daubechie-4 (d4) mother wavelet at 7th level decomposition with the help of Wavelet Toolbox embedded in MATLAB. A case study of 132kV, 160km transmission line has been used to test the novel approach. The value of the coeff...

Comparative Analysis of Distributed Power Control Algorithms in Cellular Network

ABSTRACT 7 Wireless Communication is one of the most active areas of technological development of our time. It covers a very wide array of applications that lead to an ever growing demand on the limited radio resources. Consequently, the need for efficient management of the limited radio resources has become imperatively a global issue. The complexity of the cellular system and the propagation channel resulted in the interference issues that degrade the system performance. Transmit power othe...

Improvement on Concurrency Control in a Distributed Database

ABSTRACT The study was conducted of the Improvement on concurrency control in a distributed database. The objectives of the study are to ensure consistent and correct transaction, efficient data collection and management and recoverability of data in a distributed database. The Mysql relational database was employed in collecting data for concurrency control protocols. The Unified Modeling Language (UML) was used in creating the use case, sequence diagram, class diagram and contract for the s...

Safety Analysis of Structural Foundations Built on Abandoned Solid Waste Sites

ABSTRACT This study adopted experimental design to investigate the suitability of abandoned solid waste site soil (ASWSS) as a foundation material for building construction. Measurements of geotechnical properties of stratified random soil samples of ASWSS and adjoining natural soil (NS) at depths 1.5, 2.0, 2.5, 3.0 and 3.5 m were obtained from six test points in Kaduna, Nigeria. The soil samples were subjected to sieve analysis, Atterberg limits (liquid limit, plastic limit, plasticity index...


361 - 375 Of 3414 Results
@