INTRODUCTION The most common type of heat exchanger used in industry contains a number of parallel tubes enclosed in a shell and is thus called a shell and tube heat exchanger. These heat exchangers are employed when a process required large quantities of fluid to be heated or cooled. Due to their compact design, these heat exchangers contain a large amount of heat transfer area and also provide a high degree of heat transfer efficiency. Over the years, many different types of shell and ...
ABSTRACT The refurbishment of the fluid flow demonstration unit was carried out in the Chemical Engineering pilot plant laboratory of the Institute of Management and Technology Enugu. The refurbishment process was carried out to ensure adequate functioning of the unit, to allow the continuous use of equipment in the pilot plant, so that student would use it in understanding the nature of the flow of fluid through pipe lines, these process was also for the development of the knowledge of every...
ABSTRACT This seminar studied and analyzed Water Pollution, the causes, the effects, the sources, types and control of Water Pollution in the societies water pollution occurred when pollutants were discharged directly or indirectly into water bodies without adequate treatment to remove harmful compounds, Water Pollution affected plant, and organisms living in this bodies of water. Water pollution was known to be caused by the following factors, sewage and wastewater, marine dumping industri...
ABSTACT Most of the critical condition societal problem such as conversion, storage and transportation of energy resources, food processing, preservation and supply, natural resources, development and recovery, their processing to final product, environmental quality control etc.hinge or the creative application of che- ical engineering. This led to the question “The role of chemical engineers in the society The net result is the persistent recruitment of other professionals by industries...
ABSTRACT The aim of this seminar is soap production. Due to societal demands on cleaning agent to promote her hygienic conditions leads to research on how to produce soap which is one of the cleaning agent to meet the demands. Also in order to earn living through the out-come (financially) from the soap produced , many life can be enriched in the society. The process of soap production include”: cold process and hot process. The cold process of soap production requires measurement of lye an...
ABSTRACT The title of this research work’s industrial pollution and green house effect” The purity of the atmosphere and the environment can be impaired by the industrial effluents or sewages. Poisonous compound like organic and inorganic material , the consequence of toxic inhalants such as nitrogen oxides (NOx) carbonmonoxide (COx), Sulphur oxides (OSx) and particulater. These waste tent to pollu...
ABSTRACT A paint mixer is defined as a pattern constructed for the production (mixing) of paint manually. The method of fabrication of the paint mixer involved a preliminary computation of the dimensions of the standard mixer in relation to the dimension of the reacting vessel in which they will be used in marking out, cutting out to sizes, rolling, folding, welding, body-filling and painting. The first step taken in the fabrication of this project work was the selection of material suit...
ABSTRACT This project “production of plane mirror using local raw material” is meant to study the possibility of producing plane mirror using sand rich in silica as its major local raw material. Plane mirror is produced by casting one side of a sheet glass. Presently in Nigeria, sheet glass is not used easily produce and as such, the local raw material used in the in the production of plane mirror in this product backing paint. The facilities for the production include spraying gun a...
ABSTRACT This project was carried out to ascertain whether the local palm oil met the required standard. The analytical test carried out include the free fatty acid test the acid value, iodine value moisture, content, saponfication value, peroxide value, specific gravity, colour and viscosity. The specific gravity of the oil sample was determined by comparing its weight when filled with the sample and that of water, while its moisture content was analyzed by oven drying the sample for a p...
ABSTRACT This report aimed at determining the presence and removal of mercaptan sulphur in kerosene using colour indicator method. It is known that impurities such as free sulphur, sulphur dioxide, marketers, finding materials etc. are found in petroleum products. Consequently, absorbents like molecular sieve, calcium oxide and even activated carbon could be used to trap these impurities, thereby making the product impurity free. The afficac of the absorption using calcium (Cao) �...
ABSTRACT The general approach to any design of a process plant involve an advanced network of chemical engineering process. Absorber is a process plant or equipment that are used in the purification of gas or separation of unwanted gas from the mixture when it comes in contact with the liquid. In this models mass transfer reaction and equilibrium process as they prevail in conventional tray absorbers and in cascade of trickle bed reactors are incorporated. Owring to the mass transfer characte...
Note: This work contains only the schematic diagram/design of a biogas plant Biogas typically refers to a mixture of gases produced by the breakdown of organic matter in the absence of oxygen. Biogas can be produced from regionally available raw materials such as recycled waste. It is a renewable energy source and in many cases exerts a very small carbon footprint. Biogas is produced by anaerobic digestion with anaerobic bacteria or fermentation of biodegradable materials such as manure, s...
INTRODUCTION The separation operation of drying converts a solid, semi-solid or liquid feedstock into a solid product by evaporation of the liquid into a vapor phase via application of heat. In the special case of freeze drying, which takes place below the triple point of the liquid being removed, drying occurs by sublimation of the solid phase directly into the vapor phase. This definition thus excludes conversion of a liquid phase into a concentrated liquid phase (evaporation), mechanical d...
ABSTRACT In this research project, the various nail were subjected to six environments so as to check the effect of the environments on corrosion of the nails. Two sets of nails were used; normal nail and concrete nail. Six of each type while the other not coated. The research was carried out in the physical chemical laboratory of the institute of management and technology. The environments used are acidic solution, alkaline solution, salt solution, boiled water, air medium and lubricating...
ABSTRACT This research was carried out with the sole aim of monitoring interface in the transportation of petroleum pipeline products and the analysis of this product from Enugu depot. In the research it was observed that product contaminates each other if interface was not properly monitored and cut at the appropriate time. The three major products that were considered in this research were premium motor spirit (PMS) automotive gas premium (AGO0 and dual purpose kerosene (DPK). The te...