A self-replicating rapid prototyper (RepRap) is a type of 3-D printer capable of printing many of its own components in addition to a wide assortment of products from high-value scientific or medical tools to household products and toys. There is some evidence that these printers could provide low-cost distributed manufacturing in underprivileged rural areas. For the most isolated communities without access to the electric grid, a low-cost alternative energy is needed. Solar energy can be harvested through a stand-alone photovoltaic (PV) power system specifically designed to match the needs of the RepRap. The voltage and current requirement for the printer demands the use of buck along with a bidirectional DC converters to ensure proper operation. This paper provides the design for a stand-alone PV—lithium ion battery power system with an efficient controller. Robust and agile PI controller schemes are utilized to efficiently maintain the distribution of energy through the power system. The system was defined with ordinary differential equations, simulated and tested for two operational conditions in MATLAB/Simulink. The results showed that the controller developed operates the system in a stable condition and the simulation shows steady acceptable behavior that makes this system highly suitable for hardware implementation.
Pearce, J. (2019). Self-sufficiency of 3-D printers: utilizing stand-alone solar photovoltaic power systems. Afribary. Retrieved from https://tracking.afribary.com/works/self-sufficiency-of-3-d-printers-utilizing-stand-alone-solar-photovoltaic-power-systems
Pearce, Joshua "Self-sufficiency of 3-D printers: utilizing stand-alone solar photovoltaic power systems" Afribary. Afribary, 15 Apr. 2019, https://tracking.afribary.com/works/self-sufficiency-of-3-d-printers-utilizing-stand-alone-solar-photovoltaic-power-systems. Accessed 14 Nov. 2024.
Pearce, Joshua . "Self-sufficiency of 3-D printers: utilizing stand-alone solar photovoltaic power systems". Afribary, Afribary, 15 Apr. 2019. Web. 14 Nov. 2024. < https://tracking.afribary.com/works/self-sufficiency-of-3-d-printers-utilizing-stand-alone-solar-photovoltaic-power-systems >.
Pearce, Joshua . "Self-sufficiency of 3-D printers: utilizing stand-alone solar photovoltaic power systems" Afribary (2019). Accessed November 14, 2024. https://tracking.afribary.com/works/self-sufficiency-of-3-d-printers-utilizing-stand-alone-solar-photovoltaic-power-systems