Engineering

Engineering Research Papers/Topics

Future SCADA System for Smart Grid

ABSTRACT Traditional power grids are now transformed into Smart Grids (SGs) in order to solve the problems of energy wastage, energy control, uni-directional flow of information, growing energy demand, reliability, measurement and security. Smart grids increase the automation, coordination and connectivity between these electricity suppliers, electricity users and networks used in local distribution tasks and long distance transmission. Smart Grids offer bi-directional energy flow between ele...

Design and Construction of a Four Way Traffic Light Control

ABSTRACT A traffic light also known as a traffic signal,  stop light and go light, robot or semaphore is a signally device positioned at four (cross) junction, pedestrian crossing or other locations in other to indicate when it is safe to drive or walk using a universal color code ( and in precise sequence for those that are color blind). Traffic light system operate on a turning mechanism that changes the light after a given interval of 7-120 seconds depending on the traffic congestion on t...

PHYSICOCHEMICAL PARAMETERS & LEVEL OF SOME TOXIC METALS IN STREET DUST

ABSTRACT This research study the concentration of certain toxic metals in street dust along road construction site and relate the finding to the standard control measure to determine the extent to which environmental uncontrolled process can pollute the environment. This study therefore investigate the Physicochemical parameters of street dust and concentration of three toxic metals; Nickel (Ni), Copper (Cu) and Cadmium (Cd) in Arakale – NEPA Road in Akure City of Ondo State. A total numbe...

Effect of Electromagnetic Treatment of Water on Growth, Germination and Yield of Maize Crop

The effect of magnetic treatment of water on the growth, yield and germination of maize seed has a positive impact in Agricultural crop production

Design of Next Generation Civil and Military Aircraft with Ultra-High Bypass Engine using Composites, Advanced Materials and Technology

Abstract Indirect combustion noise had not been attracting research in the past, but recent indication seems to prove that it could be a threat in the future if not addressed. Means of reducing this type of noise to a low decibel value was also included. Noise is due to the ingestion of distorted atmospheric turbulence, as the two set of blades rotate in different direction. Open rotor noise is higher since the rotors are fully exposed to oncoming turbulence and lack ducting or a nacelle to a...

Comparative Study On The Strength Of Lightweight Foamed Concrete Using Different Reagents (Lithofoam & Sodium Lauryl Sulphate)

ABSTRACT This project presents the results of the investigation conducted on a lightweight foamed concrete using different reagents; Sodium Lauryl Sulphate (SLS) and Lithofoam, with a view to determining its potential as a construction material in Nigeria. The properties investigated on the foamed concrete having target density of 1800kg/m3 were: workability, bulk density and compressive strength. The foamed concretes produced using SLS were developed using a w/c ratio of 0.5 and a mix ratio ...

Contactless Power Transfer System Using Inductive Coupling-based Wireless power transfer (WPT) Principle

Wireless power transfer (WPT) technologies have been widely used in many areas, e.g., the charging of electric toothbrush, mobile phones, and electric vehicles. This project introduces fundamental principles of three WPT technologies, i.e., inductive coupling-based WPT, magnetic resonant coupling-based WPT, and electromagnetic radiation-based WPT, together with discussions of their strengths and weaknesses. Several WPT applications are described. Open research challenges are then presented wi...

KINETICS AND EQUILIBRIUM STUDIES OF COLOUR PIGMENTS REMOVAL FROM CRUDE PALM OIL USING ACID ACTIVATED KAOLIN CLAY

ABSTRACT The  adsorptive  removal  of  the  colour  pigment  (due  to  high  content  of  carotenoids)  from  palm oil  using  ortho-phosphoric  acid  activated  kaolin  clay  was  investigated  in  this  research.  The clay  was  activated  at  different  acid  concentrations  to improve  its  adsorptive  capacity.  In  order to  study  the  effect  of  process  variables  on  the  bleaching  efficiency  of  the  raw  and  activated clay ...

Design of Effective Solid Waste Management System: A Case Study of Ifite-Awka zone, Anambra State

Focuses on the maximum volume of waste generated in a particular month in a particular area and uses a heuristic model for it's analysis. Research Problem A proper, efficient, reliable and hygienic waste handling and disposal technique tells more of our maintenance culture but the capacity and ability to efficiently manage the  waste  becomes inadequate.   The need   for this   study a rose because effective waste management is a tool for sustainable development. This can be achieved...

A Comparative Study of Gas Condensate Stabilization Techniques using Aspen HYSYS

Abstract In this report, we perform a comparison of two gas condensate stabilization techniques: fractional distillation and multi-flash vaporization. Our prime objective is to compare relevant parameters .e.g. Reid vapor pressure (RVP) and associated costs in order to determine the more effective method for the stabilization of our gas condensate feed. The Aspen Plus software application suite was extensively used for the process design and simulation as well as the economic analysis for thi...

Application of Reveal for polymer flooding modelling

ABSTRACT The maximum recoverable oil in place from the reservoir is a major challenge when it comes to EOR which is an essential part of every oil production project. In some cases, the natural drive mechanism is a relatively inefficient process and results in a low overall oil recovery. The lack of sufficient natural drive in such reservoirs has led to the practice of supplementing the natural reservoir energy by introducing some form of artificial drive, the most basic method being the inje...

DETERMINATION OF REMOVAL EFFICIENCY OF METHYLENE BLUE FROM AQUEOUS SOLUTION USING CHEMICALLY ACTIVATED CARBON PRODUCED FROM MANGO SHELL

ABSTRACT The presence of methylene blue (MB) in wastewater is a major concern in the environment due to its low biodegrability and harmful effect on man. The treatment of effluent containing such dye is important where adsorption on activated carbon (AC) produced from agricultural waste is of great choice. Optimization of the removal efficiency of MB from aqueous solution onto AC prepared from mango shell was investigated. The AC was prepared from mango shell, activated with BaCl2 at I.R (0.0...

OPTIMIZATION OF CONDITIONS FOR THE PRODUCTION OF ACTIVATED CARBON FROM MANGO KERNEL SHELL USING BARIUM CHLORIDE AS THE ACTIVATING AGENT

ABSTRACT This study was conducted to remove mango shell waste which is one of the seasonal environmental nuisance items and recycle it as a precursor for the production of activated carbon. Discarded mango shells were sourced from local vicinity, and they were washed thoroughly to remove dirt, sundried and reduced to smaller sizes. Two-Level Factorial Design under Factorial Methodology of Design Expect (10.0.1) software was employed to optimize interaction of impregnation ratio (0.033 - 0.167...

The Role of Satellite Network in future 5G wireless networks

ABSTRACT The document outlines an investigation done in order to study Fifth Generation (5G) systems and to identify a role that satellite systems will play in contribution to the many advanced and diverse demands on existing telecommunication networks. This next generation network is a build-up and phenomenal improvement in wireless communication done by the “5GPP” on the already existing mobile generations. The evolution has seen us move from first generation which employed analogue te...


2791 - 2805 Of 3414 Results